Comfort-Aire IRGPH15B - Manual (Page 3)

3
• This heater is designed for indoor use only.
• Do not locate the heater in front of or below a fixed
socket outlet.
• Comply with the minimum clearance in front of or
below a fixed socket outlet as shown in Figure 1.
• Do not install the heater where a draft is likely to
affect the temperature setting.
FIXED WALL MOUNT OPTION–INSTALLATION
INSTALL ON THE WALL
STEP 1 STEP 2
STEP 3
STEP 4
FIXED WALL MOUNT LOCATION
Refer to directions
on following page
FIG. 1
MINIMUM CLEARANCES
18" (450mm)
10" (250mm)
6" (150mm)
2
2
2