Comfort-Aire RADS-121G - Manual (Page 6)

5
Owner’s Manual Room Air Remote Controller Heat Controller, Inc.
5 6
Dehumidifying operation
In the Dehumidifying mode, you can not switch the
fan speed. It has already been automatically
controlled.
NOTE
Ensure the unit is plugged in and power is
available.
1.
Press the MODE button to select Dry.
3. Press the TEMP UP/DOWN button to
set the desired temperature. The temp-
erature can be set within a range of
Press the ON/OFFbutton to start the air
conditioner.
2.
o O o O o O 17 C/62 F~ 30 C/86 F in 1 C/1 F
increments.
Cooling /Heating/ operation Fan
Ensure the unit is plugged in and power is
available.
1.
Press the MODE button to select Cool, Heat
(cooling&heating models only) or mode.
3. Press the TEMP UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of
4. Press the FAN button to select the fan
speed in four steps- Auto,Low, Med,or High.
Press the ON/OFF button to start the air
conditioner.
2.
o O 17 C/62 F~
o O o O 30 C/86 F in 1 C/1 F increments.
Fan
In the Fan mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 2 and 4 may be performed.
NOTE
How to use the buttons
Auto operation
Ensure the unit is plugged in and power is
available.
1.
Press the MODE button to select Auto.
3. Press the TEMP UP/DOWN button to set
the desired temperature. The temperature
o O can be set within a range of 17 C/62 F~
o O o O 30 C/86 F in 1 C/1 F increments.
Press the ON/OFFbutton to start the air
conditioner.
2.
3
3
4
2
2
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
by sensing the difference between the actual
ambient room temperature and the set temperature
on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
1
1
3
3
1
MODE
MODE
TIMER
TIMER
SPEED
SPEED
ONE
TOUCH
ONE
TOUCH
SLEEP
SLEEP
3
2
1
3
MODE
MODE
TIMER
TIMER
SPEED
SPEED
ONE
TOUCH
ONE
TOUCH
SLEEP
SLEEP
SLEEP operation
Press this button to activate the Sleep
mode. This function is available on COOL,
HEAT or AUTO mode only and maintain the
most comfortable temperature for you.
In this mode the selected temperature will
O O increase by 1 C/2 F 30 minutes after the
mode is selected. The temperature will
O O then increase by another 1 C/2 F after an
additional 30 minutes. This new temperature
will be maintained for 6 hours before it
returns to the originally selected temperature.
This ends the Sleep mode and the unit will
continue to operate as originally programmed.
The Sleep mode program can be cancelled
when press the MODE, ON/OFF, FAN SPEED
and SLEEP button during operation.
In the Fan mode, the set temperature is not displayed on
the remote controller therefore the room temperature is
not being controlled, so the temp up/down buttons are
deactivated. The fan is operational only to circulate air.
Press the TEMP UP/DOWN button to set the
desired temperature. The tempature can be
set within a range of 62°F/17°C~86°F/30°C in
1°F/1°C increments.
1. In the Auto mode, the air conditioner can logically
choose the mode of cooling, Fan, or Heating by
sensing the difference between the actual ambient
room temperature and the set temperature on the
remote controller.
2. In the Auto mode, you can not switch the fan speed. It
is already being automatically controlled.
3. If a different mode is desired, it can be selected
manually.
Press the TEMP UP/DOWN button to set the
desired temperature. The tempature can be
set within a range of 62°F/17°C~86°F/30°C in
1°F/1°C increments.