Comfort-Aire A-VFH42PA-1 - Manual (Page 23)

23
Heat Controller VFH InverterFlex ® - Outdoor Ductless Mini-Split
Final Inspection
Do a visual inspection of the entire installation. Complete any final
steps and clean up the work areas.
Ensure that all units—indoor and outdoor—are working properly.
IMPORTANT!
All panels must be installed, main power turned on and wiring,
refrigerant lines, and condensate drain lines properly connected
before operating the unit.
Operation of the unit will depend on the setting of the thermostat
on the indoor unit. Refer to the indoor unit’s manual for operating
instructions.
Review the system and controls with the homeowner
Ensure that the homeowner is provided with all manuals, warranty
card, receipt and any additional documentation that might be
available or required.