Australian Monitor My Music - Manual (Page 5)

PAGE 3 MY MUSIC PROGRAM SOURCE SERIES INSTALLATION & OPERATION MANUAL
SPECIFICATIONS FRONT PANEL – AM/FM TUNER
TUNE (UP/DOWN)
Changes the tuner frequency.
2 MEMORY (UP/DOWN)
Changes the preset number.
3 BAND
Changes between AM and FM bands.
4 SLEEP
This button allows you to set a countdown timer to switch the tuner module
off. It is set in increments of 10mins form 90mins to 10mins. Pressing this
button while in sleep countdown mode turns off the sleep function.
5 1-5; +5
These buttons allow the immediate selection of a preset.
Use +5 to select 6-10.
6 MEMORY
This button allows the memory setting to be programmed.
To program a memory setting:
1. Tune to the required frequency
2. Press MEMORY (MEMO fl ashes on LCD display),
3. Press a number from 1-5 (or +5 and a number for 6-10)
4. Press MEMORY again.
This process must be completed within 4 secs or you will need to
start again.
1
AM/FM TUNER
3
5
2 1
4
6