Service – Edgecraft Chef's Choice 320 User Manual
Page 10
10
Assembled in the U.S.A.
www.chefschoice.com
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the product.
Chef’sChoice
®
, EdgeCraft
®
, FlexHone/Strop
®
and Diamond Hone
®
are registered trademarks of
EdgeCraft Corporation, Avondale, PA.
Conforms to UL Std. 982 Certified to CAN/CSA Std. C22.2 No. 64
Certified to EN 60335-1, EN 60335-2, EN 55014-1+A1, EN 61000-3-2, EN 61000-3-3
© EdgeCraft Corporation 2013
Printed in China
C13
C328980
®
EdgeCraft Corporation
825 Southwood Road, Avondale, PA 19311 U.S.A.
Customer Service (800) 342-3255 or 610-268-0500
SERvICE
In the event post-warranty service is needed, return your sharpener to the EdgeCraft factory where
the cost of repair can be estimated before the repair is undertaken. Outside the USA, contact your
retailer or national distributor.
Please include your return address, daytime telephone number and a brief description of the problem
or damage on a separate sheet inside the box. Retain a shipping receipt as evidence of shipment and
as your protection against loss in shipment.