Trademark Tools SINGLE DRAWERWORKBENCH - Manual (Page 3)

CONTENTS OF THE WORK TABLE & BACKBOARD CARTON (cont.)
13. Top rail 1198 mm (2pcs)
14A. Cross member 1186 mm (3pcs)
14B. Cross member (with holes in centre) 1186 mm (2pcs)
15. Left holed back board support 640 mm (1pc)
16. Right holed back board support 640 mm (1pc)
17. Left top cantilever arm 215 mm (1pc)
18. Right top cantilever arm 215 mm (1pc)
19. Side rail 586 mm (4pcs)
20. Left rear leg 996 mm (1pc)
21. Right rear leg 996 mm (1pc)
22. Left front leg 900 mm (1pc)
23. Right front leg 900 mm (1pc)
24. Left guide rail 599.4 mm (1pc) (for mounting drawer)
25. Right guide rail 599.4 mm (1pc) (for mounting drawer)
26. Drawer bottom (1pc) (drawer size 1093 x 448 mm)
27. Drawer left side panel (1pc)
28. Drawer right side panel (1pc)
29. Drawer rear panel (1pc)
30. Drawer front panel (1pc)