Glastender LLD3 - Manual (Page 2)

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
800.748.0423 • 989.752.4275 • Fax 989.752.4444 • www.glastender.com
s
ave
t
hese
i
nstructions
Read all instructions before using this device.
When using a lighted liquor display, basic precautions should always be followed, including the following:
danger -
To reduce the risk of electric shock:
1. Always unplug this device from the electrical outlet before cleaning or servicing.
WARNING -
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug from outlet before changing bulb assemblies, or otherwise servicing.
2. Use this device only for its intended use as described in these instructions.
3. Never operate this device if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or if it has been saturated with liquid. Contact the factory for return authorization and
repair options.
4. Never operate this device with the air openings blocked. Keep the air openings free of lint, dust, and the
like.
5. To disconnect, turn unit off then remove the plug from outlet.
6. Keep cord away from heated surfaces.
7. Do not use outdoors.
WARNING
-
Risk of electrical shock – connect this furnishing to a properly grounded outlet
only. See Grounding Instructions.
g
rounding
i
nstructions
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
danger -
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug
provided with the product - if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit and has a 3-
prong grounding plug. Make sure that the product is connected to
an outlet having the same 3-prong configuration as the plug. No
adapter should be used with this product.
Grounding Pin
Grounded
Outlet
i
mportant
S
afety
i
nStrUctionS