Avanti BCAD338 User Manual
Page 9
9
Fixed Caster
Rotating
Caster
Brake
Your Beverage Cooler is designed to either be free standing in a fixed position or moveable using
the casters (included). Follow the instructions below to correctly install the casters.
CASTER (WHEEL) INSTALLATION
WAR
N
IN
G
This unit is very heavy and this
process should not be done one
person alone. To avoid injury to
yourself and/or damage to the unit
we recommend that you proceed
according to the following steps
using 2 or more persons.
WAR
N
IN
G
To avoid damage to the unit during
installation, be sure that the area you
are going to be working in is:
• Clean
• Soft stable surface for working
• Flat and level
ST
E
P 1
Lay the cabinet down on a soft
stable surface to avoid:
• scratching the unit
• damage to the back panel
ST
E
P
2
Remove four legs from the cabinet.
ST
E
P
3
Using a Phillips head screwdriver.
Install each caster as shown using
four (4) M6 screws for each caster.
Be sure that you install the two (2)
casters with brakes in the front of the
unit as shown.
ST
E
P
4
Installation Complete.
Carefully stand the unit upright and
allow it to stand for a minimum of 2
hours before connecting to the
electrical outlet.
Leg
M6 Screw
Caster Support
Brace