Minka Group F524-ORB - Manual (Page 14)

7 INSTALLING THE WALL CONTROL
Fig.13
Remember to shut the power off at the circuit breaker or fuse box.
WARNING: HOOK UP IN "SERIES ONLY" DO NOT CONNECT THE HOT AND
NEUTRAL WIRES OF ELECTRIC CIRCUIT TO THE WALL CONTROL - DAMAGE TO
THE SWITCH AND POSSIBLE FIRE COULD OCCUR.
1. (Fig. 13) Carefully tuck the wire connections inside the outlet box. Secure the wall
control with the two screws provided.
2. Attach the wall plate over the wall control and secure with the two screws
provided.
Screws
Wall control Outlet box
Wall plate
Screws