Minka Group F548-BWH - Manual (Page 23)

SYMPTOM
Lights shut off and will not come back on.
This unit is equipped with a wattage limiting device. Lamping in excess
of 190 watts will disable your ceiling fan’s light kit. To reset your light
kit you must turn the power off and re lamp, keeping the wattage under
190 watts. Restore power to your ceiling fan and continue normal
operation.
SOLUTION
SYMPTOM
Fan Wobble
SOLUTION
Check that all blade and blade holder screws are secured.
If a Balancing kit is provided follow the instructions included with
the balancing kit to help correct any excessive wobble.
NOTE: All Blade sets are grouped by weight. Because blades vary in
density, the fan may wobble even though blades are weight
matched.