AKG Acoustics C 414B/TLII - Manual (Page 2)

Microphones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical Components
Limited Warranty
Valid only in the United States. AKG Acoustics warrants AKG products against defects in material
or workmanship for a period of three years from the date of original purchase for use, and agrees
to repair or, at our option, replace any defective unit without charge for either parts or labor.
Important: This warranty does not cover damage resulting from accident, misuse or abuse, lack of
reasonable care, the affixing of any attachment not provided with the product, loss of parts or
connecting the product to any but the specified receptacles. This warranty is void unless service
or repairs are performed by an authorized service center. No responsibility is assumed for any
special, incidental or consequential damages. However, the limitation of any right or remedy shall
not be effective where such is prohibited or restricted by law. Simply take or ship your AKG product
prepaid to our service department. Be sure to include your sales slip as proof of purchase date.
(We will not repair transit damage under the no-charge terms of this warranty.) Note: No other
warranty, written or oral is authorized by AKG Acoustics, Inc. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state. Some states do not allow
the exclusion or limitation of incidental or consequential damages or limitation on how long an
implied warranty lasts, so the above exclusions and limitation may not apply to you.
Specifications subject to change without notice.
AKG Acoustics GmbH
Lemböckgasse 21–25, P.O.B. 158, A-1230
Vienna/AUSTRIA
Tel: (43 1) 86 654-0*, Fax: (43 1) 86 654-516
Internet: http://www.akg.com
AKG Acoustics; A Division of Harman Pro Germany
Bodenseestraße 228, D-81243 München/GERMANY
Tel: (089) 87 16-0, Fax: (089) 87 16-200
Arbiter Pro Audio
Wilberforce Road, London NW9 6AX/ENGLAND
Tel: (0181) 202 1199, Fax: (0181) 202 7076
AKG ACOUSTICS, U.S.
914 Airpark Center Drive
Nashville, TN 37217, U.S.A.
Tel: (615) 620-3800, Fax: (615) 620-3875
Studer Japan Ltd.
2-43-7, Uehara, Shibuya-ku, Tokyo 151-0064/JAPAN
Tel: (813) 3465-2211, Fax: (813) 3465-2214
Erikson Pro Audio
620 McCaffrey, St-Laurent, Quebec, H4T 1N1, CANADA
Tel: (514) 738-3000, Fax: (514) 737-5069
Internet: www.jam-ind.com/eriksonpro
AKG is constantly impr
oving and modifying its pr
oducts, ther
efor
e, specifications ar
e subject to change without notice.
DS-C 414 B/TLII
The microphone shall be a 25 mm condenser type with dual
diaphragm construction and with switchable omnidirectional,
cardioid, hypercardioid and figure-eight polar patterns. The
diaphragm material shall be gold sputtered foil, and the on-axis
sensitivity shall be uniform for all patterns, and no less than 12.5
mV/Pa. The inherent noise floor of the microphone shall be no
greater than 14 dB (A-weighted), and the operating sound field for
0.5% THD shall be no less than 140 dB. The microphone size shall
be no greater than 5.55 x 1.77 x 1.37 inches, and the microphone
net weight shall be no greater than 10.93 ounces. The microphone
shall include an H 100 isolation shock mount and W 414
windscreen as standard accessories. The microphone shall operate
over the entire range of phantom powering from 12 to 48 volts. The
microphone shall be the AKG Acoustics Model C 414 B/TLII.
Graphical Data
Architects and Engineers Specifications
Cardioid
Figure eight
Hypercardioid
Omni directional