Quick Cable Inverter - Manual

General:
The safety kit is designed for installation of DC to AC power inverters up to
2500 watts. Using the wires and connectors included in this kit will
improve the performance and extend the useful life of the
DC to AC power system which includes the vehicle's
batteries and charging system, the cable and
connectors, the power inverter and the
load (TV's, microwaves, etc.)
Using the proper fuse inside the
fuse holder will protect the vehicle
and contents from damage
caused by shorted wiring.
1000-2500 Watt Safety Kit
Installation Instructions
Required Tools:
• Portable torch or soldering iron for soldering,
or crimping tool or vise grips for crimping
• Adjustable wrench with insulated handle
• Phillips and slotted screwdrivers
• Electrical tape
• Hacksaw or cable cutters
• Drill and drill bits
• Knife or wire stripper
• 4-mounting screws for power inverter
• 2-mounting bolts and nuts for fuse holder
Disconnect power before any installation
3700 Quick Drive • Franksville, WI 53126-0509 U.S.A.
Phone 800-558-8667 • Website http://www.quickcable.com
X-5461