Dynalab SMP10/120V/60 - Manual (Page 2)

English
This equipment is designed to operate under the
following conditions:-
❖
For indoor use only
❖ Use in a well ventilated ar ea
❖ Ambient temperature range
+5°C to +40°C
❖ Altitude to 2000m
❖ Relative humidity not exceeding 80%
❖ Mains supply fluctuation not exceeding 10%
❖ Overvoltage category II IEC664
❖ Pollution degree 2 IEC664
If the equipment is not used in the manner
described in this manual the pr otection provided
by the equipment may be impair ed.
Thank you for purchasing this Stuart
product. To get the best performance fr om
the equipment, and for your own safety,
please read these instructions carefully
before use.
SET
START
STOP
MADE IN THE UK
SET
STAR T
STOP
MADE IN
THE UK
Figure 1
IEC connector
Temperature
display
Control panel
Eye viewer
Sample tube
holder
Extendible feet
Instruction facia
Mains
on/off