Dynalab SI19/120V/60 - Manual (Page 7)

Fault Safety system in operation Fault displayed by
Temperature probe PT100 Automatic over-temp system LED displays Err and 0.1
reading low activated alternatively
Temperature probe PT100 Automatic over-temp system LED displays Err and 0.2
reading high activated alternatively
Triac fault Secondary relay control activated Top left dot flashes in display
Rotisserie / shaker motor Cuts power to motor No movement seen but
stalled (SI30H only) Rotisserie red indicator light
flashes
Software crash Cuts mains power No temperature or motor
power, all LED’s blank
10.1 Error codes
The Incubator has built in fault diagnostics. If a fault occurs, this system will display an error code in
the LED display to help the service engineer rectify the problem. Please see the table below for details
of error codes and other faults. In the unlikely event that a problem does occur, note down which
code / fault you observe and contact Bibby Sterilin for further assistance. If you have your own service
personnel available for repair, a comprehensive service manual is available on request.
5
11 Warranty
Bibby Sterilin Ltd warrants this instrument to be
free from defects in material and workmanship,
when used under normal laboratory conditions,
for a period of two (2) years. In the event of a
justified claim, Bibby Sterilin will replace any
defective component or replace the unit free of
charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused
by installation, adaptation, modification, fitting
of non-approved parts or repair by
unauthorized personnel.
Bibby Sterilin Ltd
Tilling Drive
Stone
Staffordshire
ST15 0SA
United Kingdom
Tel: +44 (0) 1785 812121
Fax: +44 (0) 1785 813748
E-mail: [email protected]
www.bibby-sterilin.com
12 Specification
(model SI19 & SI30H)
Overall dimensions
Height:
435 mm
Depth: 380 mm
Width: 380 mm
Incubator dimensions
Height:
200 mm
Depth: 230 mm
Width: 250 mm
Weight: 24 Kg
Capacity (nominal): 18 litres
Temperature range: Ambient +5°C – 80 °C
Temperature precision: ±0.5 °C
Temperature fluctuation: ±0.1 °C (@37°C)
Power rating:
340W (SI19 - 280W)
Temperature variation: <0.25°C