MEGUIAR'S A16 - Manual (Page 5)

A16, Quik Wax (21-107A): A1616
__________________________________________________________________________________________
Page: 5 of 12
9.1. Information on basic physical and chemical properties
Physical state Liquid.
Appearance/Odour Pleasant, fruity smell; Milky white, water-thin liquid
pH 8 - 8.9
Boiling point/boiling range 100 ºC
Melting point Not applicable.
Flammability (solid, gas) Not classified
Explosive properties Not classified
Oxidising properties Not classified
Flash point > 93.3 ºC [Test Method:Pensky-Martens Closed Cup]
[Details:D93-90]
Autoignition temperature Not applicable.
Flammable Limits(LEL) Not applicable.
Flammable Limits(UEL) Not applicable.
Vapour pressure No data available.
Relative density 1.00 [Test Method:Estimated] [Ref Std:WATER=1]
Water solubility Complete
Partition coefficient: n-octanol/water No data available.
Evaporation rate No data available.
Vapour density No data available.
Viscosity 0.15 Pa-s [Test Method:Brookfield]
Density 1 g/cm3
9.2. Other information
Volatile organic compounds (VOC) 15.0 % weight
VOC less H2O & exempt solvents 693.68 g/l
SECTION 10: Stability and reactivity
10.1 Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section
10.2 Chemical stability
Stable.
10.3 Possibility of hazardous reactions
Hazardous polymerisation will not occur.
10.4 Conditions to avoid
Heat.
10.5 Incompatible materials
Strong oxidising agents.
Strong acids.
10.6 Hazardous decomposition products
Substance Condition
None known.