Asus Motherboard A7N8X-VM/400 - Manual (Page 54)

2-22 Chapter 2: BIOS information
Full Screen Logo [Enabled]
When [Enabled], MyLogo is displayed instead of the POST messages. Setting to
[Disabled] displays the normal POST messages.
Configuration options: [Disabled] [Enabled]
AddOn ROM Display Mode [Force BIOS]
This field sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
This field selects the power-on state for the NumLock key.
Configuration options: [On] [Off]
Wait for ‘F1’ If Error [Enabled]
This field sets whether to wait for F1 key to be pressed if an error occurs.
Configuration options: [Enabled [Disabled]]
Hit ‘Del’ Message Display [Enabled]
This field toggles the display of “Press DEL to run Setup”.
Configuration options: [Enabled] [Disabled]
Interrupt 19 Capture [Disabled]
When [Enabled], it allows option ROMs to trap interrupt 19. This is required by
some PCI cards that provide a ROM based setup utility.
Configuration options: [Disabled] [Enabled]
Make sure that the above item is set to [Enabled] if you wish to use the
ASUS MyLogo2 feature. See MyLogo2 details on page 3-8.