MEGUIAR'S M08 User Manual
Page 11

M08, Mirror Glaze Maximum Mold Release Wax (23-135C): M0811
__________________________________________________________________________________________
Page: 11 of 15
Pin-2(10)-ene
Aspiration hazard
Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.
SECTION 12: Ecological information
The information below may not agree with the EU material classification in Section 2 and/or the ingredient
classifications in Section 3 if specific ingredient classifications are mandated by a competent authority. In addition,
statements and data presented in Section 12 are based on UN GHS calculation rules and classifications derived from
3M assessments.
12.1. Toxicity
No product test data available.
Material
CAS Nbr
Organism
Type
Exposure
Test endpoint Test result
Pin-2(3)-ene
80-56-8
Water flea
Experimental
48 hours
EC50
1.44 mg/l
Pin-2(3)-ene
80-56-8
Fathead
minnow
Experimental
96 hours
LC50
0.28 mg/l
Carnauba Wax 8015-86-9
Data not
available or
insufficient for
classification
Distillates
(petroleum),
hydrotreated
light
64742-47-8
Data not
available or
insufficient for
classification
NUC -
Naphthol
Spirits
64742-48-9
Data not
available or
insufficient for
classification
Paraffin Wax
8002-74-2
Water flea
Experimental
48 hours
EC50
>10,000 mg/l
Paraffin Wax
8002-74-2
Green algae
Experimental
96 hours
EC50
>1,000 mg/l
Paraffin Wax
8002-74-2
Rainbow trout Experimental
96 hours
LC50
>1,000 mg/l
Conditioners
Trade Secret
Data not
available or
insufficient for
classification
Pin-2(10)-ene
127-91-3
Data not
available or
insufficient for
classification
Turpentine
Gum
9005-90-7
Data not
available or
insufficient for
classification
Oxidised
Polyethylene
68441-17-8
Data not
available or
insufficient for
classification
12.2. Persistence and degradability
Material
CAS Nbr
Test type
Duration
Study Type
Test result
Protocol