beautypg.com

Accidental release measures, Handling and storage, Exposure controls/personal protection – MEGUIAR'S M36 User Manual

Page 3: Physical and chemical properties

background image

M36 - Hi Tech Wheel Cleaner

Environmental precautions and
cleanup methods

Personal Precautions

If emergency personnel are unavailable, contain spilled material. For small spills add
absorbent (soil may be used in the absence of other suitable materials) scoop up material and
place in a sealed, liquid-proof container for disposal. For large spills dike spilled material or
otherwise contain material to ensure runoff does not reach a waterway. Place spilled material
in an appropriate container for disposal.

6.

Accidental release measures

:

Note: See section 8 for personal protective equipment and section 13 for waste disposal.

:

Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable
protective equipment (Section 8). Follow all fire fighting procedures (Section 5).

Minimize contact of spilled material with soils to prevent runoff to surface waterways. See
Section 13 for Waste Disposal Information.

Handling

Handling and storage

Storage

7.

Wash thoroughly after handling.

Packaging materials

Use original container.

Keep container tightly closed. Keep container in a cool, well-ventilated area.

:

:

:

Recommended

8.

Exposure controls/personal protection

Hand protection

Exposure controls

A respirator is not needed under normal and intended conditions of product use.

Use latex gloves.

Safety glasses.

Eye protection

Respiratory protection

:

:

:

Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of
vapours below their respective occupational exposure limits. Ensure that eyewash stations
and safety showers are close to the workstation location.

Occupational exposure
controls

:

Skin protection

Additional body garments should be used based upon the task being performed (e.g.,
sleevelets, apron, gauntlets, disposable suits).

:

191°C (375.8°F)

Physical and chemical properties

Physical state

Boiling point

Vapour pressure

Relative density

Vapour density

Solubility

Liquid.

0.98 g/cm

3

>1 (Air = 1)

The highest known value is 2.3 kPa (17.5 mm Hg) (at 20°C) (Water).

Easily soluble in cold water, hot water, methanol, acetone.

Hydrocarbon.

Odour

pH

White.

Colour

Evaporation Rate

<1 compared to Butyl acetate.

Flash point

Closed cup: Higher than 93.3°C (200°F). (Pensky-Martens.)

Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.

9.

7 [Neutral.]

Explosive properties

:

:

:

:

:

:

:

:

:

:

:

:

Not applicable

Oxidising properties

:

General information

Appearance

Important health, safety and environmental information

Other information

VOC Content

:

<17% (v/v).

Date of issue

:

Page: 3/6

March 31, 2004.