MEGUIAR'S M88 - Manual (Page 5)

M88, Universal Mold Release Wax: M8811
__________________________________________________________________________________________
Page: 5 of 12
Half facepiece or fullface air-purifying respirator with organic vapour cartridges and P2 particulate prefilters.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state Solid.
Specific Physical Form: Paste
Appearance/Odour Light cream coloured paste with sweet fragrance
pH No data available.
Boiling point/boiling range 196.1 - 201.7 ºC
Melting point 82.2 - 87.8 ºC
Flammability (solid, gas) Flammable Liquid: Category 4.
Explosive properties Not classified
Oxidising properties Not classified
Flash point 62.8 ºC - 68.3 ºC [Test Method:Closed Cup]
Autoignition temperature No data available.
Flammable Limits(LEL) No data available.
Flammable Limits(UEL) No data available.
Vapour pressure No data available.
Relative density 0.82 g/cm3
Water solubility Nil
Partition coefficient: n-octanol/water No data available.
Evaporation rate <=1 [Ref Std:BUOAC=1]
Vapour density >=1 g/cm3 [Ref Std:AIR=1]
Viscosity No data available.
Density 0.82 g/ml
9.2. Other information
Volatile organic compounds (VOC) 71.55 %
SECTION 10: Stability and reactivity
10.1 Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section
10.2 Chemical stability
Stable.
10.3 Possibility of hazardous reactions
Hazardous polymerisation will not occur.
10.4 Conditions to avoid
Heat.
Sparks and/or flames.
10.5 Incompatible materials
Strong acids.
Strong oxidising agents.
10.6 Hazardous decomposition products