MEGUIAR'S M95 - Manual (Page 5)

M95, Speed Cut Compound (20-177C): M9501, M9532
__________________________________________________________________________________________
Page: 5 of 15
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours and particulates
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state Liquid.
Appearance/Odour Sweet hydrocarbon odoUr; White, creamy, viscous lotion
pH 8 - 8.8
Boiling point/boiling range 193.3 ºC
Melting point Not applicable.
Flammability (solid, gas) Not classified
Explosive properties Not classified
Oxidising properties Not classified
Flash point 93.3 ºC [Test Method:Pensky-Martens Closed Cup]
[Details:D93-90]
Autoignition temperature No data available.
Flammable Limits(LEL) No data available.
Flammable Limits(UEL) No data available.
Vapour pressure No data available.
Relative density 1.02 [Ref Std:WATER=1]
Water solubility Moderate
Partition coefficient: n-octanol/water No data available.
Evaporation rate No data available.
Vapour density No data available.
Viscosity 25 - 40 Pa-s
Density 1.02 g/cm3
9.2. Other information
Volatile organic compounds (VOC) 11.26 % weight
VOC less H2O & exempt solvents 501.48 g/l
SECTION 10: Stability and reactivity
10.1 Reactivity
This material is considered to be non reactive under normal use conditions
10.2 Chemical stability
Stable.