MEGUIAR'S MC205 - Manual (Page 5)

MC205, Motorcycle Plastic Polish (18-167B): MC20506
__________________________________________________________________________________________
Page: 5 of 14
The following eye protection(s) are recommended: Safety glasses with side shields.
Skin/hand protection
Gloves made from the following material(s) are recommended: Nitrile rubber.
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state Liquid.
Appearance/Odour Pleasant odour; Light blue, viscous cream
pH 8 - 8.9
Boiling point/boiling range 176.7 ºC
Melting point Not applicable.
Flammability (solid, gas) Not classified
Explosive properties Not classified
Oxidising properties Not classified
Flash point 93.3 ºC [Test Method:Pensky-Martens Closed Cup]
Autoignition temperature No data available.
Flammable Limits(LEL) No data available.
Flammable Limits(UEL) No data available.
Vapour pressure No data available.
Relative density 0.959 - 0.965 [Ref Std:WATER=1]
Water solubility Moderate
Partition coefficient: n-octanol/water No data available.
Evaporation rate No data available.
Vapour density No data available.
Viscosity 10 Pa-s - 16 Pa-s
Density 0.959 - 0.962 g/cm3
9.2. Other information
Volatile organic compounds (VOC) 17.30 % weight
VOC less H2O & exempt solvents 686.12 g/l
SECTION 10: Stability and reactivity
10.1 Reactivity
This material is considered to be non reactive under normal use conditions
10.2 Chemical stability
Stable.