Full Throttle Polaris 007-1022 - Manual (Page 3)

PLEASE READ FOLLOWING WARNINGS AND
DISCLAIMER FOR SAFE OPERATION!
BEFORE EACH RIDE
✦
Always inspect both ends of the cable, the left throttle lever, and the right-side adapter before each ride. Look for ice buildup from the cold
ride on the trailer, loose fasteners and/or kinks in the cable.
✦ Make sure before starting snowmobile that both throttles are in the FULLY CLOSED position. If anything looks amiss, either remedy the
problem or remove the adapter plate to disable left throttle.
✦ After starting engine, check to make sure that GOLDFINGER left throttle engages right side properly, and that engine immediately returns
to idle when lever is released.
CAUTIONS WHEN RIDING
✦
Getting accustomed to your newly-installed GOLDFINGER left throttle will probably take a day or two of riding. We recommend that you
carry at least the tools that you used to install your kit (allen wrenches and pliers) so that any necessary adjustments can be made while
out on the trail.
✦ We recommend that you ONLY use your GOLDFINGER when side-hilling or hill-climbing. For this reason, we have included a safety
lockout pin with your kit. This pin should ALWAYS be in place when trailriding, loading and unloading (we’ve heard horror stories of people
who have accidentally grabbed wide-open throttle when slowing for a corner, and others of people who have launched themselves
through the steel fronts of their enclosed trailers.)
✦ NEVER, NEVER, NEVER allow anyone unfamiliar with your sled to operate your machine without your first inserting the safety locking
pin!
✦ CHILDREN UNDER THE AGE OF 16 SHOULD NEVER BE ALLOWED TO OPERATE A SNOWMOBILE WITHOUT THE SAFETY
LOCKING PIN IN PLACE. (TIP: Secure your pin to the plastic clip at the end of the curly black ignition cutoff cord and you won’t lose it.)
✦ If you lose your lockout pin, please call us at (509) 927-7533 for a FREE REPLACEMENT pin.
CAUTIONS AFTER ROLLOVER OR CRASH
✦
Any time you roll your sled or crash into something (or worse, someone) it makes sense to thoroughly check out all of your controls before
riding further. After any such incidents, we strongly recommend that you remove the handlebar cover and padding to make sure your
cable is still routed properly with no kinks which might cause your throttle to malfunction. Also, turn the handlebars from left to right to
ensure that such movement does not activate either throttle.
✦ If you are unable to restore proper operation of GOLDFINGER throttle on the trail, DISCONNECT left throttle entirely by removing
stainless cable from barrel bolt until you can work on the throttle system with the proper tools back at home. It may not be enough to
merely insert the lockout pin, as it is possible for a kinked GOLDFINGER cable to cause unwanted operation of the OEM throttle!
IF YOU HAVE EVEN THE SILLIEST QUESTION, PLEASE CALL US AT:
(509) 927-7533
OR VISIT US ONLINE AT: