If the microwave is not working – Fagor MO-25DGM User Manual
Page 18

17
Combined cooking function
• Press the “
” button and “
P100”
will appear. Continue pressing until “
C-1”
or “
C-2” appears and press the “
” button to confirm. ”
C-1” means 55%
microwave / 45% grill and “
C-2” means
36% microwave / 64% grill.
• Adjust the cooking time by using the dial
and press “
” to start cooking.
Defrost by weight function
• Press the “
” button once and “
def1”
will appear.
• Turn the dial to select the weight of the
food. The range is 100-2000g.
• Press “
” to start defrosting. The
time is calculated by the oven itself.
Defrost by time function
• Press the “
” button twice and
“
def2” will appear.
• Adjust the defrost time with the dial and
press “
” to start defrosting.
Pre-set function
It is essential for the clock to be set
correctly.
Defrosting must not be among the pre-set
functions.
Example: If you wish to cook with 80%
power for 2 minutes at 21:15 hours.
• Press “
” until “
P80” appears on
the screen and press “
” to confirm.
• Select 2 minutes with the dial and press
“
”. The hour digits will flash. Turn
the dial to select 21 and press “
”
again.
• Turn again to set the minutes at 15 and
press “
”. When the programmed
time arrives, the oven will start operating
automatically.
Automatic Menu function
There are 8 menus for calculating the
cooking time automatically
(
).
• On standby, turn the dial to the right
until the desired menu appears.
• Press “
” to confirm the menu.
• Turn the dial to select the weight of the
food.
• Press “
” to start cooking.
When the cooking process has finished, the
bell will ring five times.
Menu
Weight (g) Screen Power
200
200
A-1 REHEAT
400
400
100%
600
600
200
200
A-2 VEGETABLES
300
300
100%
400
400
250
250
A-3 FISH
350
350
80%
450
450
250
250
A-4 MEAT
350
350
100%
450
450
50 (with water 450gr) 50
A-5 PASTA 100 (with water 800gr) 150 80%
200
200
A-6 PATATAS
400
400
100%
600
400
200
200
A-7 PIZZA
400
400
100%
200
200
A-8 SOUP
400
400
80%
The cooking time is pre-set automatically.
Child lock function
On standby press the “
” button for 3
seconds. You will hear a beep and “
( )” will
appear. To unlock, press the same button
again for 3 seconds until you hear it beep
again.
9. IF THE MICROWAVE IS NOT WORKING…
1. Check it is correctly plugged in. If not,
unplug it and wait for around 10 seconds
before plugging it in again.
2. Check the fuse and the circuit master
switch. Check the socket is working by
plugging in another appliance.
3. Check the control panel is correctly
programmed and that the timer has been
set.
4. Check the door is properly closed.
5. If none of the above solves the problem,
contact the authorised technical service.