System 10 stompbox installation and operation, Specifications – Audio-Technica SYSTEM 10 STOMPBOX (ATW-1501) EN User Manual
Page 7

System 10 Stompbox Installation and Operation
7
4
3
2
1
OVERALL SYSTEM
Operating Frequencies
2.4 GHz ISM band
Dynamic Range
>109 dB (A-weighted), typical
Total Harmonic Distortion
<0.05% typical
Operating Range
18.3 m (60') radius, 36.6 m (120')
diameter typical
Open range environment with no interfering signals
Operating Temperature Range
0° C to +40° C (32° F to 104° F)
Battery performance may be reduced at
very low temperatures
Frequency Response
20 Hz to 20 kHz
Depending on microphone type
Audio Sampling
24 bit / 48 kHz
RECEIVER
Receiving System
Diversity (frequency/time/space)
Maximum Output Level
1
/
4
" (6.3 mm), TRS balanced: +12 dBV
Power Supply
100-240V AC (50/60 Hz) to 12V DC 0.5A
(center positive) switched mode external
power supply
Dimensions
101 mm (3.98") W x 44 mm (1.73") H x
130 mm (5.12") D
Net Weight
565 grams (19.9 oz)
Accessory Included
Power supply, hook & loop fastener x2
UNIPAK
®
TRANSMITTER
RF Output Power
10 mW
Spurious Emissions
Following federal and national regulations
Input Connection
Four-pin Locking Connector
Pin 1: GND, Pin 2: INST INPUT,
Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Batteries (not included)
Two 1.5V AA
Battery Life
>7 hours (alkaline)
Depending on battery type and use pattern
Dimensions
70.2 mm (2.76") W x 107.0 mm (4.21") H x
24.9 mm (0.98") D
Net Weight (without batteries)
100 grams (3.5 oz)
Accessory Included
AT-GcW
Specifications