Bike-shell™ model 302-eco – American Bicycle Security Company 302-ECO User Manual
Page 2
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Bike-Shell™ Model 302-ECO
Product
Bike-Shell™ Model 302-ECO
Capacity
2 doors/2 Bikes
Materials
Locker shall be manufactured of molded fiberglass
reinforced 25% recycled plastic composite with a
smooth “X” pattern on stippled walls and top, with
smooth door frame and stippled door. Material shall be
E-glass and polyester resin at 35% ratio.
Tensile Strength, 18,000 psi. Locker shall be one piece
with no external or internal frame and no seams or
joints on tops or side walls. Material shall withstand
over 300 lb/sqft on roof and 200 lb/sqft on
walls/doors.
NO ON SITE ASSEMBLY SHALL BE REQUIRED.
Roof shall be crowned for water run-off and all corners
shall have a smooth radiused finish. Finish of UV
stabilized gelcoat does not need painting, allows
solvent removal of graffiti and is resistant to impact
and UV damage.
Interior divider wall on model 302 shall be sealed OSB
exterior board and bottom edge shall be a minimum of
1” above ground level.
Setback
Please allow 5ft clearance for both doors
Hardware
High quality custom continuous door hinge will not
rust. All fasteners on locking system shall be zinc
plated or better. Locker shall anchor in all four corners
through base flanges using expansion anchors. See
last page for anchoring details.
Locks
2 Standard Lock Options (No charge)
●Fort Lock 7 pin tumbler Pop Out “T” handle locks with
three keys and removable lock cylinders. Internal
locking hardware consists of three plated hardened
steel cams controlling an extruded aluminum locking
bar which engages the door frame over three foot
span.
●Heavy duty stainless steel padlock handle will
accommodate high security padlocks. Padlock not
included.
Colors
2 Standard Color Options (No charge)
Please call for custom color, or color match information
2 doors/2 bikes
T-Handle Padlock Handle