Viper racks – American Bicycle Security Company Viper Rack User Manual
Page 2
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Product
Viper Rack
Capacity
1041: 4 Bikes
1042: 4 Bikes
2081: 8 Bikes
2082: 8 Bikes
Materials
All MIG welded construction. Tubing is 2" OD with .09
Thick-ness. Finished racks are grit blasted, then polyester
powder coated and oven cured. Polyester powder coating will
not chip, has excellent corrosion resistance. Smooth finish will
not scratch bicycle. Base Plates shall be 6" square with gussets
for high strength.
Finishes
Powder Coated Black.
Other colors available by special order.
Installation
Methods
Viper Rack Model 1042 and 2082 with base plates use 8
expansion anchors which are available (PN#MK9000).
Installation in hard masonry is recommended. Racks can be
installed on asphalt, but concrete embedment for anchors is
recommended. Installation instructions provided with each
shipment.
Viper Rack Model 1041 and 2081 are in ground mount and
have 8" longer end posts for installation in concrete. Soft
surfaces can be accommodated with post hole digger and ready
mix concrete. Installation instructions provided with each
shipment.
Viper Racks
Installation Steps:
1041
1042
2081
2082