Swerve rack, American bicycle security company – American Bicycle Security Company Swerve rack User Manual
Page 2
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Product
Swerve Rack
Capacity
2 Bikes
Materials
1.9” Schedule 40 pipe
Finishes
An after fabrication hot dipped galvanized finish is our standard
option.
250 TGIC powder coat colors, thermoplastic coating, PVC dip,
and stainless steel finishes are also available as alternate
options.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
Stainless Steel: 304 grade stainless steel material finished
in either a high polished shine or a satin finish.
Installation
Methods
In ground mount is embedded into concrete base. Specify
In Ground Mount for this option.
Surface Mount has two 2.5”x6”x.25” feet with two anchors
per foot. Specify Foot Mount for this option.
Rail Mounted Swerves are bolted to two parallel rails
which can be left freestanding or anchored to the ground.
Rails are heavy duty 3”x1.4”x3/16” thick galvanized
mounting rails. Specify Rail Mount for this option.
Space Use
& Setbacks
Wall Setbacks:
For racks set parallel to a wall:
Minimum: 24”
Recommended: 36”
For racks set perpendicular to a wall:
Minimum: 28”
Distance Between Racks:
Minimum: 24”
Recommended: 36”
Street Setbacks:
Minimum: 24”
Recommended: 36”
Swerve Rack