Hoop rack heavy duty, American bicycle security company – American Bicycle Security Company Hoop Rack Heavy Duty User Manual
Page 2
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Hoop Rack Heavy Duty
Product
Hoop Rack Heavy Duty
Capacity
2 Bikes
Materials
2” schedule 40 pipe (2.375” OD)
Finishes
An after fabrication hot dipped galvanized finish is our standard
option.
250 TGIC powder coat colors, thermoplastic coating, PVC dip,
and stainless steel finishes are also available as alternate
options.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
Stainless Steel: 304 grade stainless steel material finished
in either a high polished shine or a satin finish.
Installation
Methods
In ground mount is embedded into concrete base. Specify in
ground mount for this option.
Foot Mount has two 2.5”x6”x.25” feet with two anchors per
foot. Specify foot mount for this option.
Rail Mounted Hoops are bolted to two parallel rails which can
be left freestanding or anchored to the ground. Rails are heavy
duty 3”x1.4”x3/16” thick galvanized mounting rails. Specify rail
mount for this option.
Space Use
& Setbacks
Wall Setbacks:
For racks set parallel to a wall:
Minimum: 24”
Recommended: 36”
For racks set perpendicular to a wall:
Minimum: 28”
Recommended: 42”
Distance Between Racks:
Minimum: 24”
Recommended: 36”
Street Setbacks:
Minimum: 24”
Recommended: 36”