Bollard hitch, American bicycle security company – American Bicycle Security Company Bollard Hitch User Manual
Page 2

American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Product
Bollard Hitch
Capacity
2 Bikes
Materials
4.5” OD Sched. 40 Pipe
Arms: 3/4” diameter solid bar
Finishes
An after fabrication hot dipped galvanized finish is our standard
option.
250 TGIC powder coat colors, thermoplastic coating, PVC dip,
and stainless steel finishes are also available as alternate
options.
Our powder coat finish assures a high level of adhesion
and durability by following these steps:
1. Sandblast
2. Epoxy primer electrostatically applied
3. Final thick TGIC polyester powder coat
Stainless Steel: 304 grade stainless steel material finished
in either a high polished shine or a satin finish.
Installation
Methods
In ground mount is embedded into concrete base. Specify
In Ground Mount for this option.
Surface Mount has 8.5” circular foot with three anchors
per foot. Specify Foot Mount for this option.
Bollard Hitch
Installation Steps: