Westwood Design Meadowdale Convertible Crib Guard Rail - Manual (Page 4)

Allen Bolt (P)
Cap Nut (Q)
Step 2
A. Screw the removable feet from the footboard into the bottom of the crib sides.
B. Adjust the spring to its lowest position, following the procedure shown in these instructions.
C. Use the bolts you removed from the footboard (O) to attach the guard rail to the crib. Tighten securely
using the allen wrench.
D. Insert the allen bolt (P) through the top hole in the corner post, and thread it into the cap nut (Q) as shown.
Tighten securely using the allen wrench. Repeat for the other side.
Required Hardware
4 x Allen Bolt, 2” Long (O)
Allen Wrench
2 x Allen Bolt, 1-1/8” Long (P)
2 x Cap Nut (Q)
Allen Bolt (O)
Removable Foot (C)