Westwood Design Meadowdale Crib Always There Hardware - Manual (Page 8)

Day Bed Conversion
A. Undo the six bolts attaching the footboard to the sides and remove the footboard. Unscrew
the removable feet from the footboard.
B. If it's not already, adjust the spring to its lowest position, following the procedure shown in
these instructions.
C. Screw the removable feet into the bottom of the crib sides.
D. Place the Right Day Bed Cap (J) against the right crib side (the extra two threaded inserts on
the side should face the inside of the crib as shown), thread the three bolts into the fittings on the
cap, and tighten with the allen wrench.
D. Repeat for the Left Day Bed Cap (H).
Left Day Bed Cap (H)
Right Day Bed Cap (J)
Undo three bolts on
each side
Removable Foot
Removable Foot