Westwood Design Brookline Convertible Crib - Manual (Page 11)

Toddler Bed Conversion
A. Using the allen wrench, remove the six bolts attaching the footboard to the crib and remove the
footboard.
B. Screw the removable feet (C) into the bottom of the crib sides.
C. Adjust the spring to its lowest position, following the procedure shown in these instructions.
D. Use the bolts (O) you removed from the footboard to attach the guard rail to the crib. Tighten
securely using the allen wrench.
E. Insert the allen bolt (P) through the top hole in the corner post, and thread it into the cap nut
(Q) as shown. Tighten securely using the allen wrench. Repeat for the other side.
Required Hardware
4 x Allen Bolt, 2” Long (O)
Allen Wrench
Removable Foot (C)
Allen Bolt (P)
2 x Allen Bolt, 1-1/8” Long (P)
2 x Cap Nut (Q)
Allen Bolt (O)
Cap Nut (Q)