Asus P4S8X-MX User Manual

Page 73

A S U S P 4 S 8 X - M X

2 - 3 3

2.6.3

Boot Settings Configuration

Boot Settings Configuration

Quick Boot

[Enabled]

Full Screen Logo

[Enabled]

AddOn ROM Display Mode

[Force BIOS]

Bootup Num-Lock

[On]

PS/2 Mouse Support

[Auto]

Wait For ‘F1’ If Error

[Enabled]

Hit ‘DEL’ Message Display

[Enabled]

Interrupt 19 Capture

[Disabled]

Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.

Set this item to [Enabled] to use the ASUS MyLogo2™ feature.

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]

2.6.2

Removable Drives

1st ~ xxth Boot Device [1st Floppy Drive]

These items specify the removable boot device priority sequence from the
available removable boot devices. Configuration options: [xxxxx Drive]
[Disabled]

This item appears only when there are removable drives (like a USB flash
disk) plugged in the system.

Removable Drives

1st Boot Device

[1st FLOPPY DRIVE]

2nd Boot Device

[ASUS USB Flash Disk]

3rd Boot Device

[ASUS USB Flash Disk]

Specifies the boot
sequence from the
available devices.