Silver King SKBD105P/CW1 - Manual (Page 7)

6
Cleaning and Refilling Procedures
Removing Valve Insert
To remove the valve insert once the beverage
container is empty, simply press on the valve slide and
remove the valve insert by pulling it straight up.
Cleaning
Once removed, the valve can be cleaned with a brush
and warm soapy water or in a dishwasher. The valve
area in the dispenser should also be cleaned with a brush
and warm soapy water.
Insert New Bag into Container
Insert a new beverage bag into the
container as shown. Lock the tube
into place at the bottom of the
container.