Deluxe food warmer, Operation (continued), Maintenance – Antunes, AJ Series 9100100 User Manual

Page 15

DELUXE FOOD WARMER

P/N 1010678 Rev. F 09/04

DELUXE FOOD WARMER

P/N 1010678 Rev. F 09/04

OPERATION (continued)

Fault Codes

When the programming parameters for Minutes/

Seconds/SHO/H2O have been inadvertently changed

to a setting below or above their limits, the unit displays

the “

ERR” fault code. If this code appears, you must

clear these settings using the following procedure:

1. Turn the Rocker Switch (power On/Off) to OFF.
2. Press and hold the Program and the Start/Stop

buttons simultaneously.

3. Turn the unit on while holding the buttons.

Release the buttons when the unit stops beeping.

NOTE: Repeat Steps 1 through 4 if the unit still dis-

plays the “ERR” fault code.

4. The display will now register 15:00.
NOTE: It is recommended that the SHO and H2O

settings be adjusted to the recommended settings

shown in the Programming section of this manual.

MAINTENANCE

WARNING

Turn the unit off, disconnect the power source

and allow the unit to cool down before performing

any service or maintenance on the unit.