EXONIC EXD 6505 - Manual (Page 27)

Setup
-27-
USING THE MENU
TV Display
Angle Mar k
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memor y
DOLBY
....GENERAL SETUP PAGE....
Set TV Display Mode
TV Display
Nor mal/PS
Nor mal/LB
W ide
Nor mal/LB
GENERAL SETUP
1.TV DISPLAY SETUP
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Played back in LETTER BOX style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Select when a wide-screen TV set is
connected.
Normal/PS (For 4:3 TV)
Normal/LB (For 4:3 TV)
Wide (For 16:9 TV)
16:9 4:3 Letter Box
4:3 Pan Scan
TV Display
Angle Mar k
OSD Lang
Spdif Output
Captions
Screen Saver
Last Memor y
LB
ON
ENG
SPDIF/RAW
ON
ON
ON
DOLBY
....GENERAL SETUP PAGE....
Go To General Setup Page
Overview Of The Main Menu
DOLBY
( )
1
( )
2
( )
3
( )
4
(1).General Settings
(2).Speaker Settings
(3).DOLBY Digital Settings
(4).Preference Settings
TV Setting
OK
Enter Up Down Left Right Previous
Touch to select
The Following Buttons For Entering
The Selection .
The buttons of the left and right are for
selection of setting type .
The buttons of the up and down are for
selection of the setting program .
1. Touch the screen of range
or press the button on remote .
2.The SETUP menu is displayed.
3.Select the preferred item by touch the
/ / / range on the screen
or by using the / / / buttons .
4.Touch screen of the range or
Press on the remote to confirm .
“ SETUP ”
SETUP
“ OK ”
ENTER