Dynatek 2002-2005 Harley-Davidson Twin Cam Touring Models - Manual (Page 2)

Remove the seat. Remove or raise the fuel
tank. The tank needs to be raised enough to
give access to the fuel injectors and TPS
wires.
Unplug the front injector. On the FI Controller,
there are 2 pairs of injector connectors. Plug
the pair with the orange wires into the front
cylinder injector harness and front cylinder
injector. Repeat this using the other
connector pair and the rear cylinder injector.
Locate the TPS connector behind the throttle
body.
STEP
1
STEP 3
STEP 2
Installation
Rear Cylinder Injector Front Cylinder Injector
TPS Connector
STEP
3
STEP
2
STEP 1
Part# DFCH-3 2