Balboa Water Group Proper - Manual (Page 2)

ELECTRICAL CONNECTION NOTICE
Your blower motor is equipped with Automatic Thermal Overload Protection.
Under normal conditions, the motor will automatically shut off before heat
damage build-up can occur. The motor will auto-restart when a safe heat level
is reached.
If your blower is overheating or reaching the temperature required to activate
the thermal protector on a constant basis, we recommend having your installation
inspected for restrictions in the airline and/or improper usage of air injectors.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When installing and using this electrical equipment,
basic safety precautions should always be followed.
Read and follow all instructions.
Do not permit children to use this product unless they are
closely supervised at all times.
NOTE: Blower must be grounded in accordance with
local and national electric codes.
The electrical supply for this product must include a
suitably rated switch or circuit breaker to open all
ungrounded supply conductors to comply with
Section 442-20 of the National Electric Code,
ANSI/NFPA 70-1987.
SAVE THESE INSTRUCTIONS
Blower Motor Wiring