Alpatronix BX120 iPhone 5/5S Battery Charging Case (2400mAh Battery Capacity & MFi Apple Certified) - Manual

Installation
LED indicators
Installing
Illustration
Hole for speaker Slide finger/coin here to remove bumper
LED
Indicator
Power Button
Kickstand
Micro USB
Charging Port
Lightning Connector
Full Accessibility to
Buttons & Camera
Changeable
Frame
① ②
④ ③
Installing: Remove the bumper and place the iPhone into the battery case.
Install the bumper on top in the correct orientation and snap into place on all
sides.
Uninstalling: Slide your finger in the bezel on the bottom side of the case and
gently remove the bumper by fingernail.
Package Contents
Battery Pack
USB power cable
User Manual
Audio jack cable
Be cautious of excessive drops, bumps, abrasions, or other impacts to this
battery. Discontinue use if dents, tears, punctures, deformities, or corrosion are
visible. Contact Alpatronix or dispose at the nearest Hazardous Waste Collection
Facility.
Do not disassemble this battery case or attempt to modify it in any manner.
Do not expose this battery case to moisture or submerge it in liquid. Keep the
battery dry at all times.
Do not attempt to charge battery case using any method, apparatus, or
connection other than the device`s USB connector.
Do not attempt to replace any part of this battery.
If the battery case is intended by purchaser to be used by a minor, purchasing
adult agrees to provide detailed instructions and warnings to any minor prior to
use. Failure to do so is the sole responsibility of purchaser, who agrees to
indemnify manufacturer for any unintended use/misuse by minors.
All battery cases have gone through a thorough Quality Assurance inspection.
If you find that your battery is excessively hot, emitting odors, deformed,
abraded, cut, or is behaving abnormally, immediately stop use and contact
Alpatronix at [email protected] or by phone at (888) 407 - 7515.
For extended storage, first charge your battery case for one hour.
Never dispose of battery case in the garbage. Disposal of batteries in the
garbage is unlawful under state and federal laws and regulations. Always
contact the manufacturer or take used batteries to the nearest hazardous waste
collection facility or a battery-recycling center.
Warning
Read all instructions and warnings prior to using this product. Alpatronix is
not responsible for improper use of this product. Improper use may result
in product damage, excess heat, toxic fumes, fire or explosion, which may
cause you harm.
Do not store battery case in high temperature enviroments, including intense
sunlight and/or heat.
Do not place battery case in fire or other excessively hot enviroment.
Notes
When the battery case is turned on, you will notice the charging signal appear
on your battery indicator. When charging is finished, the signal will disappear.
The battery case includes a USB cable. Use the provided USB cable to charge
and sync your battery case with a wall charger, or with a laptop/desktop.
Due to Apple’s placement of the headphone jack on the iPhone, not all
headphones will fit the connector. For your convenience, an adapter has
been provided. Simply connect the adapter to and keep it with your favorite
headphones or car AUX cable so that it is always ready for your phone when
you need it.
Charging your Battery Case and iPhone
Connect your battery case (iPhone already installed) to the USB power cable.
Connect the USB power cable to any USB power source such as computer to
start charging.
Charge until the LED indicators read full.
Charging your iPhone with Battery Case
Press the power button (about 3s) to charge your iPhone in condition of no
external USB power sources
Press again the power button (about 3s) to turn off the battery case when
iPhone is fully charged, which can significantly save the capacity of built-in
battery so as to charge the iPhone next time.
Charge
Product specifications
ITEMS
Model BX120
Input Voltage 5.0V 1A(Max)
Output Voltage 5.0±0.25V 1A
Nominal Capacity 2400mAh
Cell Type Li-polymer 2400mAh
Adaptable for iPhone 5 or 5S
Standby Time Up to 255h
Talk Time Up to 8h
Audio Play Time Up to 40h
Video Play Time Up to 10h
Dimensions 0.6 x 2.4 x 5.4 inches
Weight 2.8oz
Communicate Synching with iTunes
Internet Surfing Time Up to 8h
SPECIFICATION REMARK
Features
Colors match iPhone 5 and 5S style design.
Fully charges your iPhone within 2 hours.
Strong & durable material protects your iPhone from bumps
& scratching.
Protective IC circuitry avoids short-circuits, over-charging and
malfunction even under extreme conditions.
You have the option of changing frame colors to dress up your iPhone.
Visit our website or contact us to learn how you can get more bumpers.
Folding kickstand helps you enjoy movices, games, and facetime.
75-100% 50-75% 25-50% 1-25%
BX120
Battery Case for iPhone 5/5S
User Manual
Alpatronix 1 Year Warranty
To activate the 1 year warranty on your product, visit http://www.alpatronix.com and click on the
warranty link to register your product by filling out a quick and easy form. Alpatronix warranty
will fully cover your purchase against all defects in material and/or workmanship for an entire
year. Most return policies allow returns only for a period of 14 – 30 days from the date
of purchase, so hurry and register your product and give yourself peace of mind knowing
Alpatronix has got you covered for a whole year.
Help us in our charitable endeavors:
Alpatronix donates $1 to charity for every review
you leave on Amazon.com. Help us make the world
a better place, AND help us and your fellow customers
by giving us your valuable feedback.
Thank you for being a contributing
citizen of this world !
Alpatronix is a registered trademark of Saritek Technical
Solutions, Inc.
P.O. Box 17070, Anaheim, CA 92817, United States of America
All other trademarks are property of their respective owners.