Specifications – Panasonic PT-L6510E User Manual
Page 2
2
PT-L6600/L6510
BriteOptic™ LCD Projector
S P E C F I L E
Specifications
Main Unit
Power supply:
100 – 240 V AC, 50/60 Hz
Power consumption:
600 W (during standby mode with fan stopped: Max. 10 W)
Max amps:
5.0 A
Colour system:
PAL/PAL-M/PAL-N/SECAM/NTSC/M-NTSC
LCD panel:
Panel size:
1.3˝ (diagonal)
Display method:
Transparent LCD panel with Micro Lens Array (MLA) (x 3, R/G/B)
Drive method:
Active matrix
Pixels:
PT-L6600: 1,398,784 (1,366 x 1,024) x 3
PT-L6510: 786,432 (1,024 x 768) x 3
Pixel configuration:
Stripe
Screen aspect ratio:
4:3 (16:9 compatible)
Lens:
Power zoom/focus lens (1:1–1:1.3),
F 1.7–2.3, f 49.1–63.8 mm
Lamp:
220 W UHM lamps (x 2) (BriteOptic™ Dual Lamp System)
Colours:
Full colour (16,777,216 colours)
Brightness:
PT-L6600:
3600 ANSI lumens (dual lamp, high mode)
1800 ANSI lumens (single lamp, high mode)
PT-L6510:
4200 ANSI lumens (dual lamp, high mode)
2100 ANSI lumens (single lamp, high mode)
Centre-to-corner uniformity ratio:
More than 90%
Contrast:
PT-L6600: 400:1 (full field), PT-L6510: 600:1 (full field)
Resolution:
PT-L6600: RGB: 1366 x 1024 pixels, Video: 1000 TV lines
PT-L6510: RGB: 1024 x 768 pixels, Video: 760 TV lines
Scanning frequency: RGB:
Horizontal: 24–97 kHz, Vertical: 50–120 Hz
YP
B
P
R
:
480p: f
H
31.5 kHz; f
V
60 Hz
720p: f
H
45 kHz; f
V
60 Hz
1080i: f
H
33.75 kHz; f
V
60 Hz
S-Video/Video:
Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz
Screen size:
762–7,620 mm (30–300 inches) diagonally
Throw distance:
1.4–14.6 m
Optical axis shift:
10/10–1/19
Installation:
Ceiling/desk, front/rear (menu selection)
Built-in speakers:
Size:
7 x 4 cm (x 2)
Output power:
6 W (3 W + 3 W) (10% THD)
Terminals:
DVI-D IN:
DVI-D 24-pin x 1
DVI-D OUT:
DVI-D 24-pin x 1
RGB1 IN:
BNC x 5
R, G, B:
0.7 Vp-p (1.0 Vp-p for Sync on G), 75Ω
HD/VD/SYNC:
TTL, high impedance (positive/negative polarity)
RGB2 IN:
D-sub HD 15-pin x 1
Y, P
B
, P
R
:
Y: 1.0 p-p, 75Ω, P
B/
P
R
: 0.7 Vp-p, 75Ω
R, G, B:
0.7 Vp-p (1.0 Vp-p for Sync on G), 75Ω
HD/VD/SYNC:
TTL, high impedance (positive/negative polarity)
AUDIO IN for RGB:
M3 (L, R) x 1, 0.5 Vrms
RGB OUT:
D-sub HD 15-pin x 1
G:
0.7 Vp-p (1.0 Vp-p for Sync on G), 75Ω
R, B:
0.7 Vp-p, 75Ω
HD/VD:
TTL, high impedance (positive/negative polarity)
Y, P
B
, P
R
:
Y: 1.0 p-p, 75Ω, P
B/
P
R
: 0.7 Vp-p, 75Ω
VIDEO IN:
BNC x 1, 1.0 Vp-p, 75Ω
VIDEO OUT:
BNC x 1, 1.0 Vp-p, 75Ω
S-VIDEO IN:
Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75Ω
AUDIO IN for VIDEO:
RCA (L, R), 0.5 Vrms
AUDIO OUT:
M3 (L, R) x 1, 0–2.0 Vrms (variable)
SERIAL:
D-sub 9-pin x 1 (RS-232C)
REMOTE:
D-sub 9-pin x 1 (for external control)
Wired remote IN:
M3 x 1
Wired remote OUT:
M3 x 1
USB IN:
Type B x 1 (up, for wireless mouse)
USB OUT:
Type A x 1 (down, for USB hub)
Power cord length:
2.5 m
Cabinet material:
ABS/PC
as of November 2002