Electronic clock /electronic alarm, Electronic clock – Avanti DG 2401 C User Manual

Page 13

electronic clock /electronic alarm

ᕤ

Fig. 4.1

ELECTRONIC CLOCK

(fig. 4.1)

The electronic alarm is a device which groups the functions of 12 hours clock with illu-
minated display and 10 hours alarm.

Upon immediate connection of the range or after a blackout, 12•00 will flash on the dis-
play.
To set the hour it is necessary to push the

button and then, within 7 seconds, the

button until you have set the exact hour.

An energy black-out makes the clock go to zero.

ELECTRONIC ALARM

The alarm program consists only of a buzzer which may be set for a maximum period
of 10 hours.
To set the time, push the

button until you obtain the desired time in the dis-

play.
From 0•10 to 99•50 you read the time in minutes and seconds (10 seconds step); then
from 1•40 to 10•00 you read the time in hours and minutes (minutes step).
Having finished the setting, the

symbol will be lighted and the countdown will start

immediately.
During countdown the timer has priority in the display. To show the time of day press
button. At the end of the time, the

symbol will be switched off and an intermittent

buzzer, during 7 minutes, will go off; this can be stopped by pressing the

button. The

signal will be skipped if button is pressed during the last 15 seconds of the timer.

To stop the alarm countdown in any moment keep the

button pressed until you read

0•00 on the display (symbol

switches off).

IMPORTANT WARNING: THIS IS ONLY AN ELECTRONIC ALARM. REMEMBER TO
TURN OFF THE OVEN OR BROIL MANUALLY AT THE END OF COUNTDOWN.

SETTING THE FREQUENCY OF THE ALARM SOUND

The selection from 3 possibilities of sound can be made by pressing the

button.

SET TIME OF DAY

Push

button and then, within 7 seconds, the

button until you have set the

exact hour. This function remains activated 7 seconds after the last pushing of

button.
Change the hours only: press the

button for 4 seconds until the hours display will

flash.
Change the hours only by pushing the

button. The minutes and hidden sec-

onds will not be affected.