Atek electronic Tote - Manual (Page 14)

Features & Operation
Tote-Remote User’s Manual, Page 12
Black screen: In PowerPoint®, to send a “B” command to go into a
black screen, push and hold the heart-shaped button for approximately
three seconds. Do the same to exit black screen and return to your
original slide, or push the wheel button down one time to advance
directly to the next slide.
White screen: In PowerPoint®, to send a “W” command to go into a
white screen, push and hold the heart-shaped button, push the wheel
button UP one time, then quickly release both buttons. Do the same to
exit white screen and return to your original slide, or push the wheel
button down one time to advance directly to the next slide.
Alt-Tab: In PowerPoint®, to send an “Alt-Tab” command to toggle
between slideshow and normal view if slideshow is open, or between
normal view and another open application, push and hold the heart-
shaped button, push the wheel button IN, then release both buttons. To
toggle among multiple open applications, push and hold the heart-
shaped button, and then push IN the wheel button repeatedly to move
among open application selections displayed on your computer screen,
and then release both buttons when you have highlighted the
application you want to select.
Disable laser: First lock the remote control (see above). Then push
and hold the laser pointer button and push and hold the wheel button
UP. The laser pointer button will illuminate. Do not release the buttons
until the laser pointer button stops illuminating. After you release the
buttons, the laser pointer button will blink several times to confirm the
laser pointer has been disabled. Last, make sure you unlock the remote
control (same procedure as locking the remote control). To re-enable
the laser pointer, repeat this entire procedure.