Audiovox XMC10 - Manual (Page 13)

128-7472
13 of 16
-13-
positions on the surface until an audio output
is heard. The desired antenna position
should be marked with masking tape or by
another non-scratch method.
d. After determining the optimum position, turn off
Xpress XM power, disconnect the power
adapter from the vehicle cigarette lighter
receptacle and disconnect the antenna cable.
e. Plan the routing of the antenna cable to the
cradle. Make sure you avoid any obstructions
that could crimp, kink or twist the cable; use
protective grommets wherever rough openings
are encountered.
f. Route the cable from the antenna position to
the interior of the vehicle, working the cable
under the rear window molding; make
adjustments and take up slack whenever
necessary.
ANTENNA
ROUTING
THE CABLE