beautypg.com

Hr7dd pkg system overview, M1/m2) – Audiovox HR7DDPKG User Manual

Page 4

background image

-2-

HR7DD PKG SYSTEM OVERVIEW

1)

When both monitors are selected as AV1, there will be no sound output and screen will be black.

2)

M1 will display all of the functions including the FM modulator selection with the comprehensive OSD. FM
functions may also be turned off by selecting the FM ON/OFF button on the remote control.

3)

The HR7DDPKG system is supplied with two IR Headphones (P/N IR2CHS). The headphones have an A-B
switch that allow the users to select the audio from either the M1 (CH A) or the M2 (CH B).

4)

Using different IR codes, M1 will only respond when the remote control set to M1and M2 will respond only
when the remote control set to M2. Each operates independently of the other.

5)

There are 1/8" Headphone Jacks on M1 and M2 that can be used with any standard wired stereo headphones.
These jacks are controlled by the volume up/down buttons on the remote control.

(NOTE: Be sure to unplug the 1/8" Headphone plug and / or AUX input plug when opening either M1
or M2 to insert or remove a disc to prevent damage to the unit.

6) Pivot the screen until a comfortable viewing angle reached. The internal lock limits the screen to a

maximum adjustment of 30 degrees from closed position, the headrest itself can be tilted forward
to help achieve a comfortable viewing position.

9) Insert Disc 10) Eject Disc

Insert

Disc

Eject

Disc

Internal Lock

30 degrees

POWER

SCREEN

MODE

AUX

PL AY

ST OP

AUX

Input

SOURCE

M2

POWER

SCREEN

MODE

AUX

PL AY

ST OP

SOURCE

M1

POWER

SCREEN

M ODE

AUX

PLAY

STO P

SOURC E

M1

POWER

SCREE N

M ODE

AUX

PLAY

STO P

HEADPHONE

JACK

SOURCE

M2

(M1/M2)

(M1/M2)

The HR7DDPKG system contains two vehicle specific headrests. Each has a 7" Monitor and built-in
DVD Player. This system allows the users to either watch individual DVD’s or watch the same DVD
on both monitors. Both users can also share an A/V source connected to either AUX input. The full
function remote control can operate either unit by selecting MI or M2 on the remote.

Caution: Each monitor has an AUX input on the bottom right hand side of the screen. When the
AUX connector is plugged in to this input use care when pivoting the screen downwards. The
plug will limit screen travel. Excessive force can damage the screen and/or plug.