Ampeg B1RE - Manual (Page 8)

Ampeg reserves the right to change specifications without notice.
Ampeg is proudly Made in America. ©2004 SLM Electronics, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
P/N 47-843-01 • 111604
B1RE Bass Amplifier
Technical Specifications
OUTPUT POWER RATING 300 Watts RMS, 4 ohm load
175 Watts RMS, 8 ohm load
POWER REQUIREMENTS
Domestic: 120VAC, 60Hz, 300VA
Export: 100/120VAC, 50/60Hz, 300VA
230-240VAC, 50/60Hz, 300VA
TONE CONTROL RANGE
Bass: +14/-13dB @ 40Hz
Ultra Mid: +5/-11dB @ 350Hz
Treble: +18dB/-23dB @ 8kHz
GAIN 72dB
SIGNAL TO NOISE RATIO 80dB typical
SIZE AND WEIGHT 19” W x 3.25” H x 10” D; 18 lbs.
www.ampeg.com