Panasonic MC-UG223 - Manual (Page 22)

- 22 -
Cleaning Secondary Foam Filter
ROUTINE CARE OF VACUUM CLEANER
Performing the following tasks will keep your new Panasonic vacuum cleaner
operating at peak performance levels and will ensure these high levels for years to
come. Check the BEFORE REQUESTING SERVICE section in this manual for
recommendations on performing some of these tasks to help solve various
problems that may occur.
➢ Secondary foam filter protects motor.
➢ Check filter when installing a new
dust bag.
➢ If dirty, pull filter from bottom of dust
compartment and clean by rinsing in
water.
➢ When dry, slide filter back into place.
➢ Ensure filter is fully inserted under
plastic rib projections.
Always operate vacuum cleaner with genuine Panasonic Type U3 Standard or U6
Electrostatic dust bags installed. Panasonic dust bags may be purchased through
any authorized Panasonic dealer or ordered from service company.
Changing Dust Bag
➢ Pull outward on dust cover grip to
remove the dust cover.
➢ Remove dust bag by grasping
cardboard portion and pulling out.