Panasonic SC-HTB880 - Manual (Page 20)

20 RQT9903
For NFC-compatible Bluetooth ® devices
(Android TM devices) only
Simply by touching an NFC (Near Field
Communication)-compatible Bluetooth
® device on
the main unit, you can complete all preparations,
from registering a Bluetooth
® device to
establishing a connection.
Preparation
≥ Turn on the NFC feature of the device.
≥ An Android device lower than version 4.1
requires the installation of the App “Panasonic
Music Streaming” (free of charge).
1
Enter “Panasonic Music Streaming” in the search
box of Google Play
TM to search, and then select
“Panasonic Music Streaming”.
2 Start the App “Panasonic Music Streaming” on the
device.
– Follow on-screen instructions on your device.
– Always use the latest version of the App.
Press [ ] to select “BLUETOOTH”.
Touch and hold your device on the
NFC touch area of the main unit [ ].
(> p. 6)
Do not move the Bluetooth ® device until it beeps,
displays a message or reacts in some way.
Once the Bluetooth
® device has reacted, move the
device away from the main unit.
≥When the registration and connection of the Bluetooth ®
device is complete, the name of the connected device is
indicated on the display for a few seconds.
≥The location of the NFC touch area differs depending on
the device. When a connection cannot be established
even if your Bluetooth
® device has touched the NFC
touch area of the main unit, change the position of the
device. The condition may also improve if you download
the dedicated App “Panasonic Music Streaming” and
start it up.
Start playback on the Bluetooth ®
device.
≥ If you touch another device to the main unit, you can
update the Bluetooth ® connection. The previously
connected device will be disconnected automatically.
≥ When the connection is established, playback may start
automatically depending on the type of device being used.
≥ The One-Touch Connection may not work properly
depending on the type of device being used.
Remote control code
When other Panasonic devices respond to this
system’s remote control, change the remote
control code on this system and the remote
control.
Preparation
≥ Turn off all other Panasonic products.
≥ Turn on the main unit.
∫ To set the code to “REMOTE 2”
Press and hold [MUTE] and [OK] for more than
4 sec.
“REMOTE 2” is indicated on the display.
∫ To set the code to “REMOTE 1”
Press and hold [MUTE] and [4] for more than
4 sec.
“REMOTE 1” is indicated on the display.
One-Touch Connection
(Connecting by NFC)
SC-HTB880PP_RQT9903-Y.book 20 ページ ２０１４年５月８日 木曜日 午後６時１３分