Panasonic DVD-S48 - Manual (Page 13)

13
VQT3L77
Operations
Ref
erence
Troubleshooting
Before requesting service, make the following
checks. If you still need assistance, please contact
us.
U.S.A. and Puerto Rico: See page 14.
Canada: See page 15.
To reset
Images from this DVD player do not appear
on the television.
You forget your password.
Reset the DVD player to the factory defaults.
Press POWER 8 on the DVD player to
turn it on.
Press
OPEN/CLOSE ; to open the disc
tray.
Press and hold g and q on the DVD player
at the same time for more than 5 seconds
with the tray open.
All the settings return to the factory preset.
⇒
1)
2)
3)
No picture./No sound.
Check the video connection between the DVD
player and the TV.
Turn on your TV and set to the correct in
channel for the DVD player. ⇒
⇒
Remote control does not work.
Aim the remote control directly at the sensor
on the front of the DVD player. ⇒
The screen is distorted. Noise occurs.
Check if the TV System setting is correct. ⇒
Discs cannot be played back.
Check for any scratches or smudges on the
disc. If the disc is dirty, clean the disc. ⇒
Not able to select some items in the setup/
system menu.
Press STOP g twice before selecting the
setup/system menu.
Depending on the disc availability, some menu
items cannot be selected.
⇒
⇒
•
•
Speci
fi
cations /
Tr
oub
leshooting
Changing the pla
yer settings
When the following messages on the unit’s
display.
(LOAD)
Loading the media. Wait a moment. ⇒
(STOP)
Stopping the playback. ⇒
There is no disc, or a disc that cannot be
played has been inserted. ⇒
(OPEN)
The tray is open. ⇒
(TITLE)
The disc title is displayed.
Press e r w q to select the title, then
press
OK.
⇒
(NOUSB)
There is no USB device in USB mode. ⇒
DVD-S68_S48_PP-En.indd 13 DVD-S68_S48_PP-En.indd 13 2010/11/30 13:25:13 2010/11/30 13:25:13