Panasonic DMP-BDT330 - Manual (Page 9)

9
VQT4V26
G
e
tti
n
g
started
1 Standby/on switch ( Í/I) (> 14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
2 Open or close the disc tray ( > 17)
3 Blue LED
It is possible to set the LED to turn on/off.
(
> 34)
4 Start play ( > 20)
5 Stop ( > 20)
6 Display
7 USB port ( > 17)
8 V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off.
(
> 34)
9 SD card slot ( > 17)
10 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20
e up and down, 30e left and
right
11 Disc tray (
> 17)
Rear panel terminals ( > 10–13)
1 Standby/on switch ( Í/I) (> 14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
2 Start play ( > 20)
3 Stop ( > 20)
4 Open or close the disc tray ( > 17)
5 Display
6 USB port ( > 17)
7 SD card slot ( > 17)
8 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20
e up and down, 30e left and
right
9 Disc tray (
> 17)
Rear panel terminals ( > 10–13)
SD CARD
IR
4 5 6 8 7 9 10 11
1 2
3
[BDT330]
Pull to flip down
the front panel.
SD CARD
5 7 8 9 6
1 2 3 4
[BDT230]
Pull to flip down
the front panel.
DMP-BDT330_230_VQT4V26_eng.book 9 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分