Panasonic NN-SD962S - Manual (Page 12)

10
setting the clock
1.
• Press timer/clock twice.
 Colon flashes.
2.
• Set time of day using
Time Dial.

Time appears in
the display window;
colon continues
flashing.
3.
• Press timer/clock.
 Colon stops flash-
ing; time of day is
entered.
notes:
1. To reset the clock, repeat step 1-3.
2. The clock will retain the time of day as
long as the oven is plugged in and
electricity is supplied.
3. Clock is a 12 hour display.
4. Oven will not operate while colon is
flashing.
starting to use
your oven
child safety lock
This feature prevents the electronic oper-
ation of the oven until cancelled. It does
not lock the door.
note:
You can set Child Lock feature when the
display shows a colon or time of day.
to set:
• Press Start 3 times.
“Child” appears in the
display window.

"Child" continues to
be displayed until
Child Lock is can-
celled. Any button
may be pressed but
the microwave will
not start.
to cancel: • Press stop/reset 3
times.

The display will
return to colon or
time of day when
Child Lock has
been cancelled.
1.
• Plug into a properly
grounded electrical
outlet.
The oven automatical-
ly defaults to the impe-
rial measure system
(oz/lb).
2.
• Press Start to convert
to metric. Verify your
selection in the dis-
play window.
3.
• Press Stop/Reset.
 Colon appears in
the display window.
Display Window
If you wish to
use metric
system (g/kg):
IP4088_3BE30AP_19_120221 2012-2-21 Jerry 下下14:01 Page 10